RACK PP FLOATING 4/PKG Incubate up to 24 microcentrifuge tubes in a water bath (choose from 1.5ml or.5ml size). Easy to load the microtubes are held snugly and then released when the rack is pressed down on a benchtop. Dimensions are 119 x 78mm (4 11
-
P/N:
20901-905
- UOM: CS
- UOM Qty: 6
|
|
STAND PP PIPETTE SUPPORT For safe and orderly storage of up to 28 pipettes this polypropylene stand holds pipettes in a vertical position.
-
P/N:
53577-131
- UOM: CS
- UOM Qty: 12
|
|
Polypropylene Basket Features a sturdy one-piece molded construction. Secure fitting polypropylene lid holds tubes during rinse or automatic washing. Steam autoclavable at 121[degree]C. Dimensions: 12.7Lx10Dx10Hcm.
-
P/N:
60914-263
- UOM: CS
- UOM Qty: 6
- List price:
$308.68
-
Our price: $277.81
save 10%
|
|
Polypropylene Basket Features a sturdy one-piece molded construction. Secure fitting polypropylene lid holds tubes during rinse or automatic washing. Steam autoclavable at 121[degree]C. Dimensions: 15Lx15Dx15Hcm.
-
P/N:
60914-285
- UOM: CS
- UOM Qty: 6
- List price:
$532.73
-
Our price: $623.28
save 10%
|
|
RACK PP WATER BATH 13-16MM 50PLACES Molded of a special blend of polypropylene that is heavier than water these racks sink to the bottom of the bath and will not tip over. All sizes are 213 x 110mm wide (8 3/8 long x 4 5/16). Steam autoclavable at
-
P/N:
60917-503
- UOM: CS
- UOM Qty: 6
- List price:
$489.21
-
Our price: $572.38
save 10%
|
|
RACK PP WATER BATH 27-30MM 15PLACES Molded of a special blend of polypropylene that is heavier than water these racks sink to the bottom of the bath and will not tip over. All sizes are 213 x 110mm wide (8 3/8 long x 4 5/16). Steam autoclavable at
-
P/N:
60917-512
- UOM: CS
- UOM Qty: 6
- List price:
$505.76
-
Our price: $591.73
save 10%
|
|
RACK PP SLANT 13-16MM 40PLACES One side is slanted 5 degrees to produce a large surface area useful for robic cultures.
-
P/N:
60917-540
- UOM: CS
- UOM Qty: 4
- List price:
$415.75
-
Our price: $486.43
save 10%
|
|
RACK TPX ROUND FLOATING BUBBLE 20PLACES The perfect rack for use in microbiology and immunology labs.
-
P/N:
60986-358
- UOM: CS
- UOM Qty: 12
- List price:
$314.59
-
Our price: $283.13
save 10%
|
|
Flaskup Flask Holders For 25ml flasks. Eliminates unwanted tilting of small top-heavy flasks. Inside wall has a slight taper to the open bottom allowing a variety of flask shapes to fit into one holder. Wide base allows easy handling and table top stability. Polypropylene. Autoclavable.
-
P/N:
70680-600
- UOM: CS
- UOM Qty: 8
- List price:
$422.59
-
Our price: $494.43
save 10%
|
|
Polypropylene Rack Has 72 places to hold and protect 3mm thin-walled nmr sample tubes. lower deck has hemispherical wells to cradle tubes. handles in the end plates make transport easy. 21 x 11 x 22 cmh (8 3/8 x 4 1/2 x 8 3/4inch)
-
P/N:
89217-376
- UOM: EA
- UOM Qty: 1
- List price:
$73.43
-
Our price: $68.29
save 7%
|
|
