Rectangular Support Cast iron base black enamel finish plated steel rod. Bore size: 127x203mm. Rod size: 10mmx50.8cm.
-
P/N:
H-21210
- UOM: EA
- UOM Qty: 1
- List price:
$74.38
-
Our price: $63.22
save 15%
|
-
P/N:
H-21210
- UOM: CS
- UOM Qty: 10
- List price:
$699.12
-
Our price: $594.25
save 15%
|
|
SUPPORT 4 X 6Rectangular support (cast). Cast iron base with black enamel finish. Plated steel rod. Base: 4 x 6-3/4 (102mm x 172mm). Rod size: 5/16 x 18.
-
P/N:
H-21200
- UOM: EA
- UOM Qty: 1
- List price:
$36.44
-
Our price: $32.80
save 10%
|
|
Rectangular Support Cast Iron Base Black Enamel Finish Plated Steel Rod. Bore Size: 140X229Mm. Rod Size: 13Mmx610Mm
-
P/N:
H-21220
- UOM: EA
- UOM Qty: 1
- List price:
$67.31
-
Our price: $57.21
save 15%
|
|
Cast Iron Support Rings Size: 12.7cm. I.D.: 11.1cm. O.D.: 12.7cm. Distance from center of ring to center of clamp: 108mm. Plated. Attaches to support rods up to 12.7mm in diameter.
-
P/N:
H-18350
- UOM: EA
- UOM Qty: 1
- List price:
$41.80
-
Our price: $35.53
save 15%
|
-
P/N:
H-18350
- UOM: CS
- UOM Qty: 10
- List price:
$394.19
-
Our price: $335.06
save 15%
|
|
SUPPORT RING IRONSupport ring (cast). Attaches to support rod up to 1/2 (13mm) dia. Distance from center of ring to center of clamp: 4-1/4 (108mm). Size: 2. I.D.:1-5/8 (41mm) O.D.: 2-1/4 (57mm).
-
P/N:
H-18320
- UOM: EA
- UOM Qty: 1
- List price:
$20.82
-
Our price: $18.74
save 10%
|
|
Support Ring Extension Iron 76mm ring is forged of hot-rolled plated steel wire with an integral plain shank. Stem is 190.5mm.
-
P/N:
H-18430
- UOM: CS
- UOM Qty: 10
- List price:
$663.21
-
Our price: $497.41
save 25%
|
-
P/N:
H-18430
- UOM: EA
- UOM Qty: 1
- List price:
$69.32
-
Our price: $51.99
save 25%
|
|
Support Rod Holder Holder consists of a heavy cast-iron enameled clamp for fastening to the edge of a table bench or shelf up to 38mm thick. Holder accommodates two 9.5mm diameter support rods at right angles and comes with a 9.5mm diameter by 508mm plate
-
P/N:
H-21160
- UOM: EA
- UOM Qty: 1
- List price:
$84.53
-
Our price: $63.40
save 25%
|
|
Cone Tamper Used for determination of bulk and apparent specific gravity and absorption of fine aggregate. Brass mold is 40mm I.D. on top 90mm I.D. on bottom and 75mm high. Steel tamper weights 340g and has 25.4mm flat circular tamping face. Meets ASTM C1
-
P/N:
H-3360
- UOM: EA
- UOM Qty: 1
- List price:
$249.86
-
Our price: $212.38
save 15%
|
|
Double Bend Crucible Tongs Serrated jaws and riveted joint. Brass with brass finish. Wire size: 5mm. Length: 229mm.
-
P/N:
H-23250
- UOM: EA
- UOM Qty: 1
- List price:
$58.11
-
Our price: $49.39
save 15%
|
|
Triangle Iron wire (16 gage). Galvanized with plain clay pipe stems. Side length: 51mm.
-
P/N:
H-23860
- UOM: PK
- UOM Qty: 1
- List price:
$5.92
-
Our price: $5.03
save 15%
|
|
-
P/N:
H-23980
- UOM: EA
- UOM Qty: 1
- List price:
$4.33
-
Our price: $3.90
save 10%
|
|
Wax Penetration Needle For waxes having penetration no greater than 250. Tapered point blunted at tip of truncated cone. Has drilled out shaft. Hardened stainless steel. Length: 83mm. Diameter: 4.3mm. Meets ASTM specification D1321-61T.
-
P/N:
H-1310
- UOM: EA
- UOM Qty: 1
- List price:
$854.68
-
Our price: $752.12
save 12%
|
|