Humboldt Manufacturing
Search "Humboldt Manufacturing" items
Featured Categories
-
( 3 )
-
( 4 )
-
( 1 )
-
( 7 )
-
( 2 )
-
( 60 )
-
( 55 )
-
( 1 )
-
( 4 )
- View All
equip $0 - $499
CONE GREASE |
CONE GREASEPenetration cone used with all grease testing penetrometers. Hollow 90 degree brass cone highly polished stainless steel tip removable nut and stem. Adjustment made to within 0.05g of prescribed wt. of 102.5g.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
CONNECTOR F/GAS BURNERS |
CONNECTOR F/GAS BURNERSBurner gas connector a continuous flexible tube of rust-resistant steel covered with rubber and wrapped with braided green and black cotton cloth. Slip-on ends for attachment to 9mm gas lines. Meets A.G.A.S. requirements. Length: 3
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
CORK BORER W/HANDLE SET OF 6 |
Plated Brass Cork Borer Set with Handle Set of 6. Used to bore holes in corks and rubber stoppers. Consists of plated tubing with precision ground cutting edges. Smooth plastic handle. Punch included. Sizes: 4.8mm to 12.7mm.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
COUPLING 3/8 HBT H-12195 |
COUPLING 3/8 HBT H-12195Filter pump coupling fits faucet to a male 3/8 NPS pump thread.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DISH MOISTURE ALUMINUM 19X57MM |
Aluminum Moisture Dish Developed in accordance with specifications for determining moisture in grain malt flour and dried milk. Inverted slip-in cover with beaded edge for tight sealing. Can be handled with crucible tongs. Inside diameter: 57mm. 19mm deep
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DUCTILITY MOLD ASPHALT |
DUCTILITY MOLD ASPHALTStandard ductility briquet mold forms briquets to be tested in any ductility testing machine. Four machined interlocking brass segments are interchangeable with the same parts from different molds. Meets ASTM DII3 AASHTO T51.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
GLASS CUTTER 5-40MM TUBING |
GLASS CUTTER 5-40MM TUBINGCutter glass tubing bench-mounted. Cuts glass tubing up to 1-1/2 (38mm) dia. Hardened steel cutting wheel. Mounts to table top up to 1-3/4 (45mm) thick.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
GROOVING TOOL METAL HBT |
Metal Grooving Tool An accessory for use with Motorized Liquid Limit Machines.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
MOLD H-3080 |
MOLD H-3080Mold conical plastic for use with Vicat consistency testers.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
MORTAR AND PESTLE |
MORTAR AND PESTLEMortar and pestle made of hardened alloy tool steel. Mortar: 3 x 3 x 4-1/2 h (76mm x 76mm x 114mm) bore: 2 (51mm) dia. x 3 (76mm) deep pestle: 9-1/2 (241mm) overall length.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PENETRO NDL FOR BITUMINOUS MAT |
PENETRO NDL FOR BITUMINOUS MATPenetration needle (with certificate) hardened stainless steel with brass shank. for bituminous materials. Wt. 2.5g. Meets ASTM D5 and AASHTO T49.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PORCELAIN BLOCK |
PORCELAIN BLOCKRefractory block: insulator ring for carbon residue apparatus.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
REGULATOR + HOSE KIT F/LP GAS |
REGULATOR + HOSE KIT F/LP GAS
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
RING 6 IN |
Support Ring Extension Iron 152mm ring is forged of hot-rolled plated steel wire with an integral plain shank. Stem is 178mm.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SCOOP AL 5.75X3.50X10.25X14.50 |
SCOOP AL 5.75X3.50X10.25X14.50Scoop aluminum round nose. Bowl vol./ water (oz/cu. in.): 33 (61.02) bowl dimensions: length: 10-1/4 (260mm) width: 5-3/4 (146mm) depth: 3-1/2 (89mm) overall length: 14-1/2 (368mm).
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SCOOP ALUM 3.75X2X6X9.25 |
SCOOP ALUM 3.75X2X6X9.25Scoop aluminum square nose. Bowl vol./ water (oz/cu. in.): 6.7 (12.2) bowl dimensions: length: 6 (152mm) width: 3-3/4 (95mm) depth: 2 (51mm) overall length 9-1/4 (235mm).
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SCOOP ALUMINUM #1 13.5OZ |
Aluminum Scoop No. 1 Round nose. Designed to handle concrete soils sand and more in labs and in the field. Bowl volume: 13.5oz. Bowl dimensions: 17.2Lx10.2Wx6.4Dcm. Overall length: 25.4cm.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SCOOP ALUMINUM #2 20OZ |
Aluminum Scoop No. 2 Round nose. Designed to handle concrete soils sand and more in labs and in the field. Bowl volume: 20oz. Bowl dimensions: 21Lx13.6Wx7.6Dcm. Overall length: 31.1cm.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STEEL BALL 3/8IN PK10 |
STEEL BALL 3/8IN PK10Steel ball 3/8 dia. (9.5mm). Weight between 3.45 and 3.55g.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STIRRING PADDLE REPLCMT |
STIRRING PADDLE REPLCMT
|