CONE FOR FOOD+PASTE PAINTSPenetration cone for food and paste paints. Hollow aluminum 90 deg. cone stainless steel tip removable nut and stem with total prescribed wt. of 35g. Meets specifications: U.S. Dept. of Agriculture.
-
P/N:
H-2529
- UOM: EA
- UOM Qty: 1
- List price:
$919.11
-
Our price: $781.24
save 15%
|
|
CONE GREASEPenetration cone used with all grease testing penetrometers. Hollow 90 degree brass cone highly polished stainless steel tip removable nut and stem. Adjustment made to within 0.05g of prescribed wt. of 102.5g.
-
P/N:
H-2520
- UOM: EA
- UOM Qty: 1
- List price:
$1,158.20
-
Our price: $984.47
save 15%
|
|
CONE GREASE UNIVERSAL S.S.Penetration cone (stainless steel) used with all grease testing penetrometers. Hollow 90 degree cone highly polished removable nut and stem. Adjustment made to within 0.05g of prescribed wt. of 102.5g.
-
P/N:
H-2522
- UOM: EA
- UOM Qty: 1
- List price:
$1,431.94
-
Our price: $1,217.15
save 15%
|
|
CONNECTOR F/GAS BURNERSBurner gas connector a continuous flexible tube of rust-resistant steel covered with rubber and wrapped with braided green and black cotton cloth. Slip-on ends for attachment to 9mm gas lines. Meets A.G.A.S. requirements. Length: 3
-
P/N:
H-2087
- UOM: EA
- UOM Qty: 1
- List price:
$52.97
-
Our price: $50.32
save 5%
|
|
Plated Brass Cork Borer Set with Handle Set of 6. Used to bore holes in corks and rubber stoppers. Consists of plated tubing with precision ground cutting edges. Smooth plastic handle. Punch included. Sizes: 4.8mm to 12.7mm.
-
P/N:
H-9662
- UOM: PK
- UOM Qty: 1
- List price:
$120.93
-
Our price: $102.79
save 15%
|
|
COUPLING 3/8 HBT H-12195Filter pump coupling fits faucet to a male 3/8 NPS pump thread.
-
P/N:
H-12195
- UOM: EA
- UOM Qty: 1
- List price:
$32.24
-
Our price: $29.02
save 10%
|
|
Aluminum Moisture Dish Developed in accordance with specifications for determining moisture in grain malt flour and dried milk. Inverted slip-in cover with beaded edge for tight sealing. Can be handled with crucible tongs. Inside diameter: 57mm. 19mm deep
-
P/N:
H-17150
- UOM: EA
- UOM Qty: 1
- List price:
$100.85
-
Our price: $85.72
save 15%
|
|
DUCTILITY MOLD ASPHALTStandard ductility briquet mold forms briquets to be tested in any ductility testing machine. Four machined interlocking brass segments are interchangeable with the same parts from different molds. Meets ASTM DII3 AASHTO T51.
-
P/N:
H-1080
- UOM: EA
- UOM Qty: 1
- List price:
$1,199.11
-
Our price: $1,019.24
save 15%
|
|
DUCTILITY TESTING MACHINEStandard ductility test machine formed asphalt/cement or semi-solid bitumen. Three briquets can be tested. Direct-drive motor maintains speeds of 1/4 1 or 5 cm per minute. Single lead screw prevents agitation of water and prematur
-
P/N:
H-1050
- UOM: EA
- UOM Qty: 1
- List price:
$44,772.78
-
Our price: $38,056.86
save 15%
|
|
GLASS CUTTER 5-40MM TUBINGCutter glass tubing bench-mounted. Cuts glass tubing up to 1-1/2 (38mm) dia. Hardened steel cutting wheel. Mounts to table top up to 1-3/4 (45mm) thick.
-
P/N:
H-13550
- UOM: EA
- UOM Qty: 1
|
|
Metal Grooving Tool An accessory for use with Motorized Liquid Limit Machines.
-
P/N:
H-4232
- UOM: EA
- UOM Qty: 1
- List price:
$237.33
-
Our price: $201.73
save 15%
|
|
LIQUID LIMIT OF SOIL TESTLiquid limit machine for determining liquid limit of soil. Unit consists of brass cup cam mechanism carriage and crank mounted on a hard rubber base. Includes ASTM grooving tool and gauge block. Hand crank can be shifted to right
-
P/N:
H-4230
- UOM: EA
- UOM Qty: 1
- List price:
$1,991.89
-
Our price: $1,693.11
save 15%
|
|
MOLD H-3080Mold conical plastic for use with Vicat consistency testers.
-
P/N:
H-3080
- UOM: EA
- UOM Qty: 1
- List price:
$221.26
-
Our price: $188.07
save 15%
|
|
MORTAR AND PESTLEMortar and pestle made of hardened alloy tool steel. Mortar: 3 x 3 x 4-1/2 h (76mm x 76mm x 114mm) bore: 2 (51mm) dia. x 3 (76mm) deep pestle: 9-1/2 (241mm) overall length.
-
P/N:
H-17300
- UOM: EA
- UOM Qty: 1
|
|
PENETRO NDL FOR BITUMINOUS MATPenetration needle (with certificate) hardened stainless steel with brass shank. for bituminous materials. Wt. 2.5g. Meets ASTM D5 and AASHTO T49.
-
P/N:
H-1300
- UOM: EA
- UOM Qty: 1
|
|
PORCELAIN BLOCKRefractory block: insulator ring for carbon residue apparatus.
-
P/N:
H-2505
- UOM: EA
- UOM Qty: 1
- List price:
$389.24
-
Our price: $330.85
save 15%
|
|
REGULATOR + HOSE KIT F/LP GAS
-
P/N:
H-6100
- UOM: EA
- UOM Qty: 1
|
|
Support Ring Extension Iron 152mm ring is forged of hot-rolled plated steel wire with an integral plain shank. Stem is 178mm.
-
P/N:
H-18460
- UOM: EA
- UOM Qty: 1
- List price:
$38.51
-
Our price: $28.88
save 25%
|
|
SCOOP AL 5.75X3.50X10.25X14.50Scoop aluminum round nose. Bowl vol./ water (oz/cu. in.): 33 (61.02) bowl dimensions: length: 10-1/4 (260mm) width: 5-3/4 (146mm) depth: 3-1/2 (89mm) overall length: 14-1/2 (368mm).
-
P/N:
H-3732
- UOM: EA
- UOM Qty: 1
- List price:
$55.58
-
Our price: $52.80
save 5%
|
|
SCOOP ALUM 3.75X2X6X9.25Scoop aluminum square nose. Bowl vol./ water (oz/cu. in.): 6.7 (12.2) bowl dimensions: length: 6 (152mm) width: 3-3/4 (95mm) depth: 2 (51mm) overall length 9-1/4 (235mm).
-
P/N:
H-3730
- UOM: EA
- UOM Qty: 1
- List price:
$36.43
-
Our price: $34.61
save 5%
|
|