BURNER CYL HBT H-5890Burner Bunsen with adjustable threaded needle valve. (high BTU) gas: LP BTU: 2000-3200. Mixing tube: 1/2 (13mm) inlet O.D.: 7/16 (11mm).
-
P/N:
H-5890
- UOM: EA
- UOM Qty: 1
- List price:
$40.86
-
Our price: $36.77
save 10%
|
|
BURNER JR. UNIV. BLASTBurner universal blast burns all gases. This bleeder valve unit provides small needle-sized to large brush flame patterns. Three interchangeable burner tips universal ball joint that controls the burner head to any angle. Inlet O.D.:
-
P/N:
H-5080
- UOM: EA
- UOM Qty: 1
|
|
BURNER MICRO ART GASMicro-burner fixed orifice small intense flame is very useful for micro methods of analysis. Serrated gas inlet connections and an aluminum mixing tube. Die-cast zinc alloy nickel-plated base. BTU output: 300-800 overall height 3-1/2 g
-
P/N:
H-5805
- UOM: EA
- UOM Qty: 1
- List price:
$98.75
-
Our price: $74.06
save 25%
|
|
BURNER UTILITY BLASTBurner utility blast for all gases. Inlet: 3/8 (10mm) BTU output: 21000.
-
P/N:
H-5100
- UOM: EA
- UOM Qty: 1
|
|
CLAMP BURET PK-5Clamp burette round wall-mounting jaw construction brass nickel-plated. Jaw opening 3/8 to 3/4 (10mm to 19mm).
-
P/N:
H-8100
- UOM: PK
- UOM Qty: 1
- List price:
$51.08
-
Our price: $43.42
save 15%
|
|
CLAMP CYLINDERGas cylinder clamp accommodates cylinders 4-1/2 to 11 dia. Extra strong web-type canvas strap and nonslip buckle provide solid tight support for cylinder. Mounts to bench or table top up to 2 thick without marring surface.
-
P/N:
H-8280
- UOM: EA
- UOM Qty: 1
- List price:
$200.41
-
Our price: $180.37
save 10%
|
|
Universal Swivel Jaw Extension Clamp Stamped steel clamp features plastisol-covered upper and lower swivel jaws. Lower jaw permits orientation at any angle. Maximum jaw opening is 76mm. Overall length is 254mm. Forged steel handle: 10mm diameter. Shipping
-
P/N:
H-8390
- UOM: EA
- UOM Qty: 1
- List price:
$73.89
-
Our price: $62.81
save 15%
|
|
Universal Swivel Jaw Extension Clamp Stamped steel clamp features plastisol-covered upper and lower swivel jaws. Lower jaw permits orientation at any angle. Maximum jaw opening is 51mm. Overall length is 222mm. Forged steel handle: 10mm diameter. Shipping
-
P/N:
H-8370
- UOM: EA
- UOM Qty: 1
- List price:
$59.65
-
Our price: $50.70
save 15%
|
|
CLAMPH-D SCREW COMPRSR PK-10Clamp heavy-duty screw compressor heavy zinc-alloy die-casting and 1/4 -20 brass compression screws nickel-plated. Closed-jaw C-clamp with side post for tube insertion.
-
P/N:
H-8755
- UOM: PK
- UOM Qty: 1
- List price:
$23.26
-
Our price: $20.93
save 10%
|
|
CLAY TRIANGLE 2-1/2IN PK/10Clay triangle 2-1/2 (64mm) iron wire (16ga.) galvanized with clay pipe stem.
-
P/N:
H-23870
- UOM: PK
- UOM Qty: 1
- List price:
$5.72
-
Our price: $4.86
save 15%
|
|
