VWR Talon Two-Prong Large Swivel Clamp Single adjustment clamp. Jaw size: 19mm to 77mm. Two-prong design ideal for beakers flasks and test tubes. Shaft wing nut allows 360-degree rotation. Clamp extends 138mm. Q-clamp post holders grip rods up to 19mm. Supplied with fiberglass finger covers.
-
P/N:
21573-606
- UOM: CS
- UOM Qty: 25
- List price:
$1,671.47
-
Our price: $1,504.32
save 10%
|
|
VWR Talon Three-Prong Swivel Clamp Dual adjustment clamp has a maximum jaw size of 64.8mm. Three-jaw configuration holds irregular shapes easily. Shaft wing nut allows clamp to rotate 360 degrees. Clamp extends 136mm. Post holders grip rods up to 19mm. Supplied with fiberglass finger covers.
-
P/N:
21573-708
- UOM: CS
- UOM Qty: 20
- List price:
$1,593.57
-
Our price: $1,402.34
save 12%
|
|
VWR Talon Regular Hosecock Clamp Hosecock clamp delivers precise flow control without sharp edges that can cut into tubing. Tubing retainer screw located on side of clamp allows easy positioning of tube. Maximum tubing size: 19mm.
-
P/N:
21716-102
- UOM: CS
- UOM Qty: 30
- List price:
$1,191.30
-
Our price: $1,072.17
save 10%
|
|
VWR Neoprene Flask Underlay (VFLUN) Made of long-lasting green Neoprene rubber. Moderate heat and oil resistance. Concave recess on top supports round-bottom flasks and dishes. Holds 250 and 500mL flasks firmly in place.
-
P/N:
56255-006
- UOM: PK
- UOM Qty: 6
- List price:
$212.80
-
Our price: $180.88
save 15%
|
|
VWR Talon Connector Rod end connector holds rods or clamps firmly at 90 degree angle and are ideal for semi-permanent installations. Connectors come with two set screws and fit 13mm rods.
-
P/N:
60079-010
- UOM: CS
- UOM Qty: 20
- List price:
$521.47
-
Our price: $458.89
save 12%
|
|
VWR Talon Multiple Rod Connector Connector offers the maximum adjustment capabilities by holding rods at 90 degrees in horizontal and/or vertical configurations. Maximum rod diameter 13mm.
-
P/N:
60079-053
- UOM: CS
- UOM Qty: 20
- List price:
$1,077.19
-
Our price: $947.93
save 12%
|
|
VWR Talon End-to-End Connector Connectors extend the length of extension clamps and lab frame rods. Corrosion-resistant connectors come with two set screws. Maximum rod diameter 13mm.
-
P/N:
60079-100
- UOM: CS
- UOM Qty: 25
- List price:
$911.56
-
Our price: $820.40
save 10%
|
|
VWR Talon Horizontal Mounting Bars Mounting bars come with a channel coupler for use in regular and short form channels. Bars feature threaded ends for direct installation into channels. Locking nut included. Length is 152mm.
-
P/N:
60079-106
- UOM: CS
- UOM Qty: 20
- List price:
$1,047.03
-
Our price: $921.39
save 12%
|
|
VWR Talon Horizontal Mounting Bars Mounting bars come with a channel coupler for use in regular and short form channels. Bars feature threaded ends for direct installation into channels. Locking nut included. Length is 203mm.
-
P/N:
60079-107
- UOM: CS
- UOM Qty: 20
- List price:
$1,154.94
-
Our price: $1,016.35
save 12%
|
|
VWR Talon Hook Connector Hook connector allows one-handed assembly of two components with one adjustment screw. Easy to use. Maximum rod diameter is 13mm.
-
P/N:
60079-166
- UOM: CS
- UOM Qty: 35
- List price:
$692.56
-
Our price: $623.30
save 10%
|
|
