Inductor^ Inductor, made from 20 gauge copper wire. It has an inductance of 5 mH and low resistance. A metal core can be added to increase inductance, The ends of the coil wire are exposed so that you can easily make connections to the Circuit Board or to
-
P/N:
470112-964
- UOM: EA
- UOM Qty: 1
|
|
Voltage Probe^ Voltage Probe, This sensor is used to measure voltages in the range of -30 to +30 voltsUse this sensor in experiments that involve voltages larger than 10 volts, such as when working with large solar panels. Since this voltage probe covers
-
P/N:
470112-966
- UOM: EA
- UOM Qty: 1
|
|
Kit^ Rotational Motion Accessory Kit, Use to study the motion of a physical pendulum
-
P/N:
470112-968
- UOM: EA
- UOM Qty: 1
|
|
Anemometer^ Anemometer, measure wind speed in a variety of experiments. Hold the sensor in your hand to measure wind speed in dynamic environments or use the accessory rod to position it in front of wind tunnels or fans, standard camera mount on the back.
-
P/N:
470112-970
- UOM: EA
- UOM Qty: 1
|
|
Diffraction Apparatus^ Diffraction Apparatus, Used to map light intensity versus position for many-slit geometries, Slits are made by depositing metal film on glass, creating extraordinarily clean slits with fully opaque blocking areas.
-
P/N:
470112-972
- UOM: EA
- UOM Qty: 1
|
|
Digital Control Unit^ Digital Control Unit, combined with features in Logger Pro, makes control of electrical devices, such as buzzers, lights, motors, pumps, and relays, both straightforward and flexible. The DCU is a great way to introduce hands-on STEM
-
P/N:
470112-974
- UOM: EA
- UOM Qty: 1
|
|
Independence of Motion^ Independence of Motion, enables the Projectile Launcher to perform the classic experiment where one ball is dropped as another is projected horizontally. The balls strike the floor simultaneously. A built-in level makes leveling th
-
P/N:
470112-982
- UOM: EA
- UOM Qty: 1
|
|
Potassium ion-selective electrode^
-
P/N:
470112-984
- UOM: EA
- UOM Qty: 1
|
|
Motion Detector Clamp^ Motion Detector Clamp, screws into the back of the Motion Detector, and then can be clamped to a variety of objects such as table tops, ring stands
-
P/N:
470113-950
- UOM: EA
- UOM Qty: 1
|
|
Kit^ Rotary Motion Motor Kit, ncludes a small electric motor with pulley, rubber band belt, motor clip, and mounting screw. The motor can be attached to the Rotary Motion Sensor, and be used as an analog tachometer, or generator
-
P/N:
470113-966
- UOM: EA
- UOM Qty: 1
|
|
