Adapter, Hose; Millipore; 1/4 in. NPTF to 5/16 in. ID; Material: Polypropylene; Diameter: 0.25 in.
-
P/N:
XX4304704
- UOM: PK
- UOM Qty: 2
|
|
O-ring; Viton; Accessory for In-Line Filter Holder (part no. XX4304700)
-
P/N:
XX4304702
- UOM: PK
- UOM Qty: 6
|
|
O-ring, Silicone (2-131), Replacement part for Cat. No. XX44 047 00 Millipore Stainless-Steel Filter Holder
-
P/N:
XX4304701
- UOM: PK
- UOM Qty: 6
|
|
Filter holder; Millipore; In-line; Inlet, 1/4 in. NPTF; connector for 6 mm to 9.5 mm I.D. flexible tubing; Outlet, 1/4 in. NPTF; connector for 6 mm to 9.5 mm I.D. flexible tubing; Filter Dia., 47mm
-
P/N:
XX4304700
- UOM: EA
- UOM Qty: 1
|
|
Filter Holder; Stainless Steel; Millipore; Use to ultraclean or sterilize small volumes via gas pressure filtration through membrane supported on holder base; Filter Diameter: 47mm; Filtration Area: 11.3 cm sq.; Vol.: 340mL; Height: 53.3cm
-
P/N:
XX4004740
- UOM: EA
- UOM Qty: 1
|
|
O-rings, PTFE Resin; Millipore; Replacement part for filter holder (part no. XX4004700 and XX4004740)
-
P/N:
XX4004716
- UOM: PK
- UOM Qty: 5
|
|
Gasket, Locking ring, PTFE, Replacement part for Cat. No. XX65 047 30 Millipore Patch Test Kit and Cat. Nos. XX40 047 00 and XX40 047 40 Stainless-Steel Filter Holders
-
P/N:
XX4004714
- UOM: PK
- UOM Qty: 5
|
|
Kit, Replacement Parts, For Cat. No. XX40 025 00 Millipore Filter Holder, Comes with (5) PTFE locking nut washers, (5) Viton-A (2-021) O-rings, and (5) stainless-steel support screens
-
P/N:
XX40025RK
- UOM: EA
- UOM Qty: 1
|
|
-
P/N:
XX4002516
- UOM: PK
- UOM Qty: 6
|
|
Holder, Filter, 25mm, Replacement part for Cat. No. XX67 025 00 Millipore Filterjet Solvent Dispenser, Also usable by itself for inline pressure filtration of gases
-
P/N:
XX4002500
- UOM: EA
- UOM Qty: 1
|
|
